MicaSense RedEdge-P — High-Resolution Multispectral & RGB Drone Camera

Detailed Vegetation Analysis with High-Resolution Imagery

Five multispectral bands and a high-resolution panchromatic sensor for detailed vegetation mapping, plant counting and research.

RedEdge-P adds panchromatic imaging to a five-band multispectral system. Compatible processing can pan-sharpen multispectral outputs using the higher-resolution spatial information. The Standard, Blue and Green configurations contain different spectral bands; they are not cosmetic camera colours.

Technical content updated 17 November 2026 · checked against official manufacturer sources
MicaSense RedEdge-P standard five-band multispectral and panchromatic drone camera
Standard RedEdge-P hardware. Manufacturer product photograph distributed through a sales channel.
05 + PANmultispectral + panchromatic
1.6 MPper multispectral band
5.1 MPpanchromatic sensor
≈2 CMpan-sharpened GSD at 60 m

RedEdge-P specifications and workflow context

Manufacturer specifications are shown with their acquisition or processing conditions. Confirm the current configuration and intended outputs before procurement.

01
Multispectral imaging

5 bands

Band centres differ between Standard, Blue and Green
02
Multispectral resolution

Approximately 1.6 MP per band

03
Panchromatic sensor

Approximately 5.1 MP

04
Published pan-sharpened GSD

Approximately 2 cm/pixel at 60 m AGL

Processing-dependent output, not the native multispectral resolution
05
Radiometric workflow

DLS 2 + calibrated reflectance panel

06
Storage and capture

CFexpress; up to 3 captures/second

Capture rate depends on configuration and operating conditions
MicaSense RedEdge-P Standard, Blue and Green spectral configurations shown together
RedEdge-P Standard, Blue and Green are spectral configurations, not camera colour options. Official manufacturer family image.

Three configurations. Three different band sets.

Centre wavelength and bandwidth are shown together. Check which configuration contains the inputs required by your index or analytical method.

Standard

BandCentreBandwidth
Blue475 nm32 nm
Green560 nm27 nm
Red668 nm14 nm
Red edge717 nm12 nm
Near-infrared842 nm57 nm

Green

BandCentreBandwidth
Cyan502 nm18 nm
Green550 nm12 nm
Yellow570 nm14 nm
Red678 nm14 nm
Near-infrared754 nm10 nm

Blue

BandCentreBandwidth
Ocean blue444 nm28 nm
Green531 nm14 nm
Red650 nm16 nm
Red edge705 nm10 nm
Red edge740 nm18 nm

What changes in the field and in processing.

The practical reasons to choose RedEdge-P, with the integration and interpretation boundaries kept visible.

01

01 / PAN-SHARPENING

Sharper spatial detail does not mean more spectral bands.

Pan-sharpening combines higher-resolution panchromatic spatial information with multispectral imagery. It can improve the visible detail of an index or reflectance map, but PIX4D warns that the transformation can reduce radiometric accuracy. Keep the intended use—visual interpretation, measurement or classification—clear when selecting outputs.

  • Retain native multispectral data for traceable analysis
  • Use compatible software and the correct camera configuration
  • Assess both spatial alignment and radiometric effects
02

02 / THREE SPECTRAL CONFIGURATIONS

Choose wavelengths for the analytical question.

The Standard configuration supports established vegetation workflows. Blue and Green shift the measured wavelengths to support different research and index requirements. Review the band table rather than assuming every RedEdge-P produces the same NDVI, NDRE or pigment-related inputs.

Technical boundary: Additional wavelengths are useful only when the index, classification method and processing chain can use them.

  • Standard: established visible, red-edge and near-infrared set
  • Green: cyan, green, yellow, red and a different near-infrared band
  • Blue: ocean blue, green, red and two red-edge bands
03

03 / INTEGRATION + THROUGHPUT

Plan storage, triggering and data handling with the aircraft.

CFexpress storage and rapid capture support efficient acquisition, but the complete system depends on the mount, power and triggering interface, drone payload, mission planning and post-flight data workflow. A technical demonstration should use the intended platform and representative data.

  • Confirm mechanical and electrical integration
  • Estimate capture volume and data-backup requirements
  • Verify the installed software version against the camera files

Where this sensor can contribute.

Representative application contexts, not claimed Easepect customer outcomes. Suitability depends on the target, acquisition design, processing method and validation.

01

Plant counting and crop scouting

Use suitable spatial detail and validated algorithms to investigate individual plants and within-field variation.

Discuss this application
02

Research and phenotyping

Combine spectral and spatial measurements with plot records and field observations.

Discuss this application
03

Vegetation mapping

Generate detailed orthomosaics and index products for repeatable condition assessment.

Discuss this application
04

Conservation and wetlands

Examine vegetation patterns at spatial scales that complement satellite and field observations.

Discuss this application

Who should consider RedEdge-P?

Users who need finer spatial detail than a conventional five-band workflow and have a clear reason to select Standard, Blue or Green spectral bands.

A pan-sharpened map is not automatically a radiometrically superior measurement. Plant counting and species classification require suitable imagery, algorithms and validation; no universal detection rate is implied.

Product introduction and technical Q&A.

Two official manufacturer videos with written context. YouTube loads only after selection; the hardware image is a facade, not a claimed video frame.

01PRODUCT INTRODUCTION

MicaSense RedEdge-P

Manufacturer introduction to RedEdge-P and its multispectral and high-resolution imaging capabilities. The written page explains the panchromatic workflow and distinguishes native multispectral detail from pan-sharpened outputs.

Manufacturer imagery is used as the facade, not represented as a frame from this video.

Open official video on YouTube
02TECHNICAL INTRODUCTION + Q&A

RedEdge-P Introduction and Q&A Session

Technical overview of RedEdge-P imaging capabilities and common product questions. Use the current band tables and specification review on this site alongside the video when evaluating a configuration.

Manufacturer imagery is used as the facade, not represented as a frame from this video.

Open official video on YouTube

Questions to resolve before selecting RedEdge-P.

It records higher-resolution spatial information that compatible software can use for pan-sharpening. This improves spatial detail in supported outputs but does not add another multispectral band.

Verify the exact camera and processing configuration.

Manufacturer and channel imagery illustrates the referenced hardware. Supply scope, price, stock, warranty and availability are confirmed separately.

Specify RedEdge-P around the outputs you actually need.

Share the application, drone platform, project area, required data products and timeline. Easepect can discuss the current configuration, technical demonstration, integration and training without assuming universal software support or project results.